Introduction to Copper
Copper is a reddish metal with brown color, it is a tough, ductile and malleable material. Copper is widely used in various industries becasue it is an very good conductor both of heat and electricity.
Information of Copper
|CNC Machining Metal||Copper 101|
|Excellent electrical conductivity|
Soft and malleable
|min +/-0.02mm||Electrical components|
Available copper properties
|Steel Type||Yield Strength (MPa)||Elongation at Break (%)||Hardness (Brinell)||Density (g/cm³)||Maximum Temp (°C)|
The values above are typical averages and could vary based on specific type.
Available surface finishing for copper part
|As-machined||As machined means the parts without any surface treatment after they get off the machines.||All materials||n/a||None|
|Sanding and Polishing||Polishing is a surface finishing process to create a smooth surface. With mechanical, chemical or electrochemical methods, polishing will reduce the surface roughness of the parts to get a bright and reflective surface.||All materials||Smooth, glossy finish||$$|
|Bead Blasting||Bead blasting use high speed jetted sand and iron shots to hit the surface of the workpiece. it will change the surface of part and improve the mechanical properties of part.||Aluminum, Stainless Steel, Steel, Brass, Copper||n/a||$|
|Powder Coating||Powder coating is a surface finishing process that adhere dry powder on the surface of a meatal part.||All metal materials||Glossy or Sand||$$$|
|Marking||Marking is available in differnt types and different methods.||All materials||n/a||$$|